Clean & Minimal 4K TV Setup – Hiding Cables In The Wall

Are you tired of the unsightly mess of cables that comes with setting up a 4K TV in your living room? If so, you’re not alone. The good news is that there is a solution to this common problem. A clean and minimal 4K TV setup can be achieved by hiding the cables in the wall, creating a sleek and tidy look that will elevate the design of your living space. In this blog post, we will discuss the process of hiding cables in the wall for a clean and minimal 4K TV setup, as well as the benefits of this approach. Say goodbye to tangled cords and hello to a clutter-free entertainment area.

Clean & Minimal 4K TV Setup – Hiding Cables In The Wall

Hey what’s up everyone oli here so this video is definitely directed at beginners you know if you’re someone who doesn’t have much experience with putting stuff up on the wall I definitely think you’ll be able to do it if you watch this video the toughest Thing I’ve done before this is put up a loo roll holder so if I can put a loo roll holder up and also put it even on the wall with a media unit I think anyone can so yeah don’t worry if you’re not that experienced I definitely think You can do it if you watch this video so what you need to get started is a drill a spirit level or laser level a TV mount from Amazon or wherever else when you get a TV mount from some string or some thin rope so you can use it to feed the Cables through the wall and obviously your media unit you’re also going to need some screws for that media unit to put in the wall those screws will very much depend on the type of wall you have so most modern homes like the one I’m in have plasterboard walls and which make It super easy to drill stuff into it might seem thin or might seem not that strong at first but with the right screws and with the right bolts you shouldn’t have an issue I went with Molly bolts so these Molly balls basically going to the wall and then as You tighten them up they sort of flare out to get extra grip and to hold themselves up against the wall so they make it super strong pretty much I decided to mount the media unit first so this IKEA media unit the best unit that I bought very cheap 60 pounds Something like that without the doors you know has some nice cable management at the rear and has a hole in the top to feed cables through as well you can use a laser level to align the holes for the media unit or you can actually measure From the bottom which is what I did certainly if you measure up say 50 centimeters from the bottom for each hole you’ll basically get them level so there’ll be at the same height IKEA do provide a booklet with this media unit showing the distances for each hole for Each screw which is brilliant you know it makes it super easy to work out how far apart each hole needs to be this is very easy to do but preferably you’ll probably have two of you probably have a friend who which is what I did I had my friend Charlie help me out you know we worked out the holes and then I’ll see putting the media unit on the wall itself thankfully and the brackets that IKEA provide for this media unit have quite a bit of leeway so you know if you don’t get the holes exactly aligned doesn’t matter too much You can basically move the media unit up or down a little bit to get it absolutely perfect you know you can put a spirit level on top of the media unit to make sure it’s exactly level next I put the TV mount up and I basically used Exactly the same methods to put the media unit up i measured from the top of the media unit to see how high i want the TV mount and then just aligned where i want two screws with a pencil with a pen or whatever and then just drill holes in I probably wouldn’t recommend The TV mount that I bought you know this TV man you have to get the holes exactly right to get the TV mount straight to get the TV straight I’d recommend a TV man which has a little bit of leeway on one side so that you can move it up or down just To get it exactly level I’ll leave a link to one down description below if I can find one on Amazon that lets you adjust it after you’ve made the holes but if I can’t I’ll just leave a link to the one that I’ve bought anyway now finally you want to feed the cables Through the wall now this is a daunting task and this is probably the thing that concerned me mice because I wanted a very clean looking setup I didn’t want to see the cables or anything but I was scared to drill massive holes in the wall so thankfully it wasn’t hard at all You know if you have plaster board walls like I do you can just drill through it with a circular saw which you can put on the end of you drill and I’ll leave a link in description below one I bought they’re so cheap you can buy like a pack Of circular saws for like eight or nine pounds eight to ten pounds something like that from hammers and I think I bought mines for like eight pounds comes in a pack you put onto the end of the trail and then you just draw straight into the wall and it will basically soar Out a part of the wall I did two holes one where the TV mount is and one where the actual media unit is and then thankfully I have a bit of a gap between the cement blocks their cinder blocks and the actual plaster board so I can Feed the cables right through to feed the cables through I use some string which I just bought from any other hardware store you can get pretty much you know and I basically put the string through the top hole let it go down to the bottom hole grabbed it Made a loop and then tied the HDMI cables the power cables whatever else to that string and then basically just fed it through which makes it super easy to feed cables through your wall and just do it as many times as you like for how many cables you have and then there you Have it it’s basically as simple as that I know it can be daunting at first it really was to me I was very scared to to basically mess anything up make any holes that I didn’t want to make or whatever but I just still felt like I Had to do it I have to do you know if I won that sort of nice clean TV setup I knew I’m going to have to make some holes and if you do end up making some holes which you don’t intend to you can just fill them up and paint them over Which is exactly what I did you know when I first started I didn’t make some holes I didn’t want to make and you know for the media unit I actually didn’t get it exactly level so I had to make some extra holes but I ended up just filling Them in and then having a painter come around and just paint everything over and now you can’t even tell the wall behind the TV it’s painted in a paint called it chic shadow by jhalak s– if you guys are interested it’s a really nice shade of grey not too dark but not Too like either and it sort of changes depending on the light so in the day it looks nice and cool you know has a sort of bluey sort of purpley undertone and in the evening when I have warm lighting on you know when I have my lamp so on When I have my ceiling lights on which are much warmer it looks much more flatter much more like a stone gray and which I think it looks awesome it looks almost a little bit beijing which I like the main reason I went for the IKEA best of media unit was because I actually Couldn’t find anything else…

Frequently Asked Questions

What is a clean & minimal 4K TV setup?

A clean & minimal 4K TV setup is one that focuses on reducing visual clutter and creating a streamlined aesthetic. This often includes mounting the TV on the wall, hiding cables, and incorporating sleek and simple design elements.

How can I hide cables in the wall for my 4K TV setup?

There are a few different methods for hiding cables in the wall for a 4K TV setup. One option is to use a cable management kit that allows you to run the cables through the wall and out of sight. Another option is to hire a professional to install an in-wall cable management system.

Why is it important to hide cables in a 4K TV setup?

Hiding cables in a 4K TV setup helps to maintain a clean and uncluttered look, which can enhance the overall aesthetic of the room. It also reduces the risk of tripping over cables and makes it easier to keep the area clean.

What are some tips for creating a clean and minimal 4K TV setup?

Some tips for creating a clean and minimal 4K TV setup include using a wall mount for the TV, choosing a slim and sleek TV stand or entertainment center, hiding cables in the wall, and minimizing the number of electronics and accessories on display.

Do I need to hire a professional to hide cables in the wall for my 4K TV setup?

While it is possible to hide cables in the wall for a 4K TV setup on your own, hiring a professional can ensure a neat and professional-looking result. A professional can also help to navigate any building codes or regulations that may apply to in-wall cable installations.

I hope you find useful my article Clean & Minimal 4K TV Setup – Hiding Cables In The Wall, I also recommend you to read my other posts in my blog.

If you need help with anything join the community or do not hesitate to contact me.

Please consider joining my newsletter or following me on social media if you like my content.